The components of the living room ceiling lamp cover machine are relatively simple, and the important thing is that it consists of 3 parts. 1. Part of the air pressure: In the air pressure system, attention should be paid to the cleanliness level of the oil to maintain the quality of the oil. The oil with good stability and high quality should be used. Deterioration affects the stability of the air pressure attitude.
2. Part of the motor control system: the use of non-contact switch type integrated circuit chip integrated ic, the connection of the cable is greatly reduced, and the safety risk caused by the power line is further increased, and the stability is improved. Moreover, it is often a common problem due to the looseness of the contact point screws and the aging of the contact point. Generally, the new product should be disassembled after one million times of use to ensure the stability of the motor control system. In particular, environmental factors such as dust adhesion and vapor humidity will also affect the posture of mechanical equipment.
3. Mechanism Part: Die Thickness Adjustment Mechanism The drive shaft drive system wheel or drive system drive chain should be maintained for deviation or slack. Check whether the pins and screws on the transmission gear of the transmission system are loose, and whether the lubricating oil is sufficient. Part of the mechanism should be maintained and lubricated on time to reduce friction and damage. The screw caps and clamping screws on the head plate should be maintained to prevent the Corinthian column from splitting due to uneven bearing capacity.
The acrylic lampshade manufacturer tells you the five key features of the acrylic lampshade machine. 1. The high-strength and high-strength service platform is precisely polished. The surface of the service platform is evenly distributed with suction and air holes. The service platform is equipped with a fine adjustment rocker in the horizontal and vertical orientations, which can be adjusted accurately and is convenient for overprinting and plate matching. 2. Equipped with manual/automatic/automatic three packaging and printing methods, and the indirect time of automatic packaging and printing is controlled by computer (1~9 seconds). Individually designed engine lift equipment.
3. The frequency conversion motor drives the packaging and printing knife table, and the optical eye manipulates the stroke arrangement and calibrates it separately. 4. The screen printing lift and the whole process of packaging and printing use a separate driving source, and the posture is harmonious. Sino-foreign cooperation high-strength vacuum suction pump, super-power vacuum pump suction, to ensure accurate multi-color overprinting. 5. The viewing angle of scraping and ink return can be adjusted, and the off-grid aspect ratio can be controlled at will. Column structure, the screen printing screen is vertically lifted left and right, and the packaging printing head is up and down.